ַ㽭ήTͶSI@^ 

ͷ:c@YoҰlϢ

λ : ҼyT >> aƷչʾ >> yTT >> PTyTT yTT

aƷչʾ

ɫߣߣɫվ,xnxxйƵ,ӱ̴ѧҳ


rg2019-10-17  Դtutorial-omondo.com

   
    yоÓֲг̎r]|ܷr£ywyоy׃yTwyU~סPwb䷽ʽᣬ¶yоͨ^ҎyUcyо֏Bӣ@ӾͿ^mCyTܷ̎⣬ɫߣߣɫվ,xnxxйƵ,ӱ̴ѧҳ´_After the bonnet is removed, except for the special valve, the wedge Angle of the valve core is in the friction Angle field. No matter how the pressure on the two end faces of the valve core changes, the valve core will not extrude itself from the seat under the condition of self-locking, and there is no extruded situation for the flat valve core.

  • (44)

  •     1UШʽlyyUcyоBʧЧr݆ȻDӣͨ^݆yо픻yʹ_yоcyܷgܷ⣬@Ǒ@NޏͷǰlȔQyTPwñѱPȻΌywϵ˨ϵĸQɎ׿ۣȫQ¡


        2P]ķ^mD݆@ryUٰlƄӣywϲwywx˭h^yоcyܷgܷǷס]ܣн|©ֻҪ^̕rgӰ푬Fʩ̎ͿɌ˨ϵĸȫQ£ȡɫߣߣɫվ,xnxxйƵ,ӱ̴ѧҳϲּyUyеyо픶˱¶鿴yUcyоԭȵBӷʽԼʧЧԭƶQʩ

  • (32)

  •     3ywϲеyUppDyUĸϺ˳ͬr߀ҪyUĸioĸȡ݆yUĸλӡ


        4Will be taken out of the stem and the valve core re-connection, the general stem and the valve core recovery connection are using welding method, this method is very good in the valve core is easy to fall off the waterline, wind line and steam line, even if the valve core seat seal is not tight, there is leakage of the medium, as long as it does not affect the construction, can be used.

  • (41)
  • ͡Ľ|yTޏ͕rֱMкӺܲȫȌyU^ȡ̎Ҫ؄eʽbryUcyоBӽ|øߏȵճa̎yо픶ˬF@׹zyUBӶӹݼyȻBӡҪ]ǣyUcyоBӰbᣬyUcywbƽҪֱҪãtޏ_yTryU_Py


        5yUBᣬywϺ͉wɫߣߣɫվ,xnxxйƵ,ӱ̴ѧҳyU룬ܷ|ƬҕrQֹܷͶй©ywλᣬywݿף˨QQoҕҪϺa䲿ϣωwmoጢyUĸ݆oioĸޏ͹Y